Uncoiling Slitting Cutting Collecting Line Introduction
Our steel coil sheet uncoiling leveling slitting recoiling machine line can produce various of steel roof and wall panel, it is a new building materials, the products are widely used as the roof and wall of factory, warehouse, garage, gymnasium, exhibition center, cinema, theatre, etc. It has many advantages, such as easy installation, short building period, beauty, light weight but high strength.
Uncoiling Slitting Cutting Collecting Line working flow :
The steel coil sheet uncoiling leveling slitting recoiling machine line includes in decoiler, guiding device, slitting device, cutting device, length measure device, extension device, re-coiler, hydraulic station and PLC controlling system.
Hydraulic decoiler→Slitting →Extension →Recoiler
The main parameters suitable for Uncoiling Slitting Cutting Collecting Line:
1). Raw materials grade: Galvanized steel coil/Cold rolled coil
2). Raw materials thickness:0.3~3mm
3). Raw materials width:1250mm
4). Raw materials inner diameter:Φ508mm
5. Raw materials outer diameter:≤Φ1500mm
6. Raw materials coil weight:12Tons
7. Slitting speed:0~30m/min(During normal work)
8.Land occupation area: About 30m×5m
Uncoiling Slitting Cutting Collecting Line each parts of main details
A. Hydraulic decoiler:
Single cantilever structure bearing capacity 12Tons
Support range:470-530mm hydraulic tension,electric unwinding power:7.5KW frequency conversion .
Hydraulic pump 4Kw
B.Shovel head leveling device
Hydraulic shovel head with two shafts and total 11rollers(Up 5rows ,down 6rows ),roller diameter 110mm
After the steel coil on the decoiler enters the working position,Cylinder action of the pressure roller device,Roller falling,pressed on a steel strip coil,starter motor,rotating the steel strip on the reel.Shovel head out,steel plate enters the feed roller along the shovel head,passing the pinch of the feed roller and then passing it forward.
C.Slitting part
Slitting roll diameter 160mm-180mm,materials is 40Cr.
Blade tool outer diameter 260-300mm thickness 10mm 5Blades*6pieces,materials is Cr12MoV. Matching ruler steel sleeve,can adjust the size.The rubber sleeve is removed to prevent the strip and the board from being damaged.
Hydraulic control change the blades memorial arch .
Main motor power :15KW speed regulation
D.Hydraulic cutting machine
Double cylinder diameter 70mm,Guide column structure
E.Waste materials collection
LiJu Motor,Power 2.7KW*2sets
F.Hydraulic re-decoiler with coil car
With quick adjustment separator tray,re-coiler inner diameter 500-530mm .Re-coiler max outer diameter1600mm .Load bearing 12T ,Single cantilever structure hydraulic tension adjustment.Include hydraulic unloading trolley and press arm ,power 7.5KW speed regulation.
G.Two sets of hydraulic system and two sets of control system.
Remarks:The voltage 380V 50HZ 3Phase or based on customer's local need .
Uncoiling Slitting Cutting Collecting Line package and shipment details
1.Main steel coil sheet uncoiling leveling slitting recoiling machine line is nude packing (If you need, we can also packed it with water-proof plastic)
2. PLC control system and motor pump are packed with water proof paper,spare parts in carton box.
3.One set of machine needs a 40' container to shipping.
4.When ship the roll forming machine,We will also send one set CD and specification(Chinese and English) to you with the machine,they can teach you how to operater the machines.
After Sales Service of Uncoiling Slitting Cutting Collecting Line:
1. Warranty :One year,and we will provide technical support for whole life of the equipment.
2. Delivery time: Within 25 days after deposit receipt your payment
3. Guarantee period: 24months free service/ pay service all the machine life
4. Installation and training
If buyers visit our factory and check the machine, we will teach you how to install and use the machine and also train your workers/technician face to face.
){kind=link}