| Customization: | Available |
|---|---|
| After-sales Service: | Video Technical Support, Online Support |
| Warranty: | 2 Years |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
CZ purlin size:
| C U Z Purlin Machine | ||||
| 1 | Flat cutting head | one | ||
| 2 | Feeding | Guide shaft+Guide wheel | ||
| 3 | Leveling | Up three down four+Two shaft to send The solid shaft modulation and polishing plating heat treatment | ||
| 4 | Main forming | 18 roll stations (One set shaft is used for the waist high forming arbitrary adjustable roller set of 87-95 degrees) With 13 set of CZ swap modules, Rotate 180 degrees to complete switch |
||
| 5 | Press rib | ""straight rib | ||
| 6 | Straightening | The ten roll CZ dedicated two axial alignment+Two roller axial alignment A total of two straightening unit |
||
| 7 | Lead to send | With the transmission,Upper and lower shaft gear drive | ||
| 8 | Punching | After forming double vertival and horizontal 14*14 punch+double vertival and horizontal 18*35mm punch | ||
| 9 | Cutting | After forming the infinite shear system,Shear without change blade,Random blades of 80-200,The other blade, 200-300 one piece | ||
| Control System | ||||
| 1 | PLC Simens | 1 Set | ||
| 2 | Remodel type | Electrical remodel (Three sets remodel motor0.75*3kw) | ||
| 3 | Remodel distribution box | 1 Set Installed in the middle of frame | ||
| 4 | An external controller | 1 pic (Can be convenient midpoint dynamic control in the production process, the debugging process forward and backward) | ||
| 5 | The main parts of origin | PLC Touch screen,relay(Japan omron),Limit switch(Korea autonics),The length of the encoder(Japan omron) | ||
| Hydraulic system | ||||
| 1 | Hydraulic motor | Outside the five-star piston rod | ||
| 2 | Hydraulic pump | Power:22Kw 500 litres of fuel tank volume | ||
| 3 | The main part origin | Beijing huade electromagnetic valve | ||
| Decoiler | ||||
| 1 | Load weight | 5T | ||
| 2 | Hold tight way | Manuel Four connecting rod centre to hold tight | ||
| 3 | The brake | Main shaft double hold | ||
| Receiving table | ||||
| 1 | Length | 3 meters 2 sets | ||
| 2 | Receiving type | Frame body is channel steel and welded, roller surface | ||
| The performance parameters | ||||
| 1 | Roller | Material:GCr15 bearing steel The processing technology:Nc machining after heat treatment to HRC58-60, better polishing plating again |
||
| 2 | Main shaft | Material:40Cr The processing technology:Nc machining modulation handle HRC28-32, then fine polishing plating |
||
| Product parameters | ||||
| 1 | Product specifications | 1. (1) C width width (80-300mm), Z (100-300 mm) between any transformation;(2) the waist high (30-70mm) between any transformation;(3) small side (10-20 mm);(4) thickness t (1.5 -3.0 mm) is adjustable | ||
| 2 | Forming speed | High speed 25m/min(According to the number of the punching hole) | ||
| 3 | Raw Materials | Q195, Q235 hot rolling steel strip, or hot galvanized strip steel (1.5-3.0mm) | ||
| Along with the accessories and conditions | ||||
| 1 | Tool | 1 set | ||
| 2 | The instructions | 1 book | ||
| 3 | Device color | The main body is blue and frame is gray | ||
| Terms | ||||
| 1 | Delivery | within 30 days after receiving the deposit | ||
| 2 | Package | export standard package for container | ||
| 3 | Payment | TT(30% by TT in advance,70% by TT after inspect the machine before delivery) | ||
){kind=link}